Mechanical Safety - Tents - Autohome Official

We are pleased to announce that Autohome® successfully passed the following Automotive tests carried out by the entity in charge of TÜV SÜD.

MECHANICAL SAFETY TESTS ON ROOF TENTS

Form: ITA_F_09.01E
TEST REPORT NO. MES1830762A01TR

DURABILITY TEST

DURABILITY TEST OPENING, CLOSING AND ZIP (300 TIMES)

The test consists of carrying out the procedure for 300 cycles unlocking the tent – opening the curtain tent – closing the tent – locking the tent.

Locking, opening, closing and locking the tent + zipper is considered as 1 cycle.

The test was performed by an operator who manually completed the required 300 cycles.

The test was carried out with a positive result, at the end of the test no damage or breakage that could cause product malfunctions was detected

Test Result: PASS

VERTICAL TEST

HEIGHT: 1500 M

The test was performed from a height of 1500 mm. Two impacts were recorded:

– One on long side

– One on the short side

At the end of the test a damage was detected at the point of impact and the product is slightly deformed. However, the functionalities for which the product is manufactured are retained.

Test result: PASS

The test was performed from a height of 1500 mm. Two impacts were recorded:

– One on long side

– One on the short side

At the end of the test a damage was detected at the point of impact and the product is slightly deformed. However, the functionalities for which the product is manufactured are retained.

Test result: PASS

ASSEMBLY DURATION TEST

MOUNTING AND DISMOUNTING (50 TIMES)

The test consists of mounting and dismounting the tent on the roof bars according to the assembly instructions.
The test must be performed 50 times.

We have detected a slight deformation of the clamp.

Test result: PASS